Non-metallic mineral processed by the economic mill for processing of non-metallic minerals, many minerals are starting from ground, a professional crusher, non-metallic ore crushing mill Raymond mill to the desired particle size In after ultrafine mill, Raymond mill, high pressure micro-grinding and other equipment to be grinding fineness needed. In this process, from the natural mineral into industrial raw materials, the degree of enrichment technology, the greater the value of the processing, the higher the market value. Non-metallic mineral ultrafine grinding through metal minerals have greater value after the general can be increased by 4-30 times, not only considerable economic benefits, the value of minerals and applications will have greatly improved. Lei machinery to the group, industrialization, standardization, serialization, brand development direction in expanding brand influence and product quality, it is also of Raymond, ultrafine grinding, high-pressure micro-grinding, etc. product research and development of machinery and equipment put a lot of manpower and financial resources. Zhengzhou Lei Machinery Co., Ltd. "integrity-based, quality first, users first" philosophy, product quality and credibility of corporate life mill, is willing to wholeheartedly to provide users with high-quality products and friendly service. Raymond machine failures tips: Raymond mill equipment as a professional European version of the mill, a lot of the necessary equipment for raw material production plant, can complete a variety of materials processing and production, the mill had requested in good much, so if there is some aspect of mishandling, the device is likely to malfunction, which delayed production, here to share some of the common reasons for failure and approaches with you. First, if the work process Raimundo, we found no powder or yield a lower than normal level, and this time you should consider whether or not the powder does not adjust well, because the powder is not good enough if the seal, it will make has been finely ground powder suck back; of course, there may be more serious damage to the blade, so that the material to be machined is no way to scoop up all the ultra-fine milling machine, this time it will need to carry out the relevant checks, powder and the blade is to check focus, if we find the powder is not sealed related adjustments will be carried out, if the blade wear is relatively large, so this time we need a new one. Second, Raymond machine can process a very delicate powder, if the process out of the powder found in processed fairly thick, or too thin, so this time we should consider whether or not analyze machine problems, and if this place goes bad, action would not achieve the grade, so that process out of the powder either too thick or too thin. There may be inadequate fan capacity, which will result in processing out of the powder is too thin or too thick, this time on the need to import wind turbine blades and adjust the opening of the replacement. Third, Raymond appear larger in the production process is not normal noise or vibration occurs, this time we should consider whether or not the material hardness strong, resulting in a greater impact, but also need to consider whether or not bolt loose, These will produce noise, but the solution is to adjust to the quantity, if it is material hardness is too high, you can consider some of the feed particle size reduction. Ultra-fine milling machine, milling machine, the machine is provided by Lei Lei Machinery Co., Ltd. Zhengzhou. Zhengzhou Lei Machinery Co., Ltd. (www.hnzljx.net) (www.hnzljx.net) quality of service and products, continue to receive the recognition and trust of new and old customers and the industry. Our company is a certified member of the whole alliance network operators, business alliance customer service icon on the page, you can talk directly with our customer service staff, to our future cooperation happy!